HYDROMETER TEMPERATURE-CORRECTION RECORD
Documentation aid for a permitted flooded lead-acid battery test; not a sampling procedure or acceptance specification.
Job/battery ID and construction:
Applicable battery and hydrometer instructions/revisions:
Sampling permission and required precautions established by:
Hydrometer model/ID; scale; compensation state (raw/already compensated/unknown):
Per-cell original observation (keep all entries):
Cell ID | Original SG | Electrolyte temperature/unit | Temperature method | Time
Correction source/revision and exact table column:
Reference temperature/unit:
Selected adjustment (sign and value):
Original SG + signed adjustment = derived SG:
Rounding and compensation already applied:
Unresolved inputs or repeat-test changes:
Applicable battery comparison criterion/source:
Supported conclusion and next authorized check:
Fictional article example only: 1.244 at 60 F, Discover Table 2 adjustment -0.008 -> 1.236 referenced to 80 F. Not measured data or battery limit.
Keep original and derived values separate; do not apply correction twice or substitute a voltage correction.
STEP Early Access: https://stepdiagnostics.com/#early-access