IMPACT WRENCH AIR-SUPPLY COMPARISON RECORD
Original editorial worksheet — obtain limits and test conditions for the actual tool.

Complaint / case:
Tool model / ID; product and safety information / revision:
Required operating pressure / units / test condition / source:
Maximum permitted pressure / source:
Minimum hose inside diameter; stated air consumption and its basis:
Gauge ID / range / suitability; test connection arrangement:
Isolation / depressurization / hose protection / PPE checks:
Hose ID / length; reel; couplers; filter and regulator configuration:
Other air users and compressor operating state:

BASELINE
Stopped-tool pressure / units / measurement location:
Prescribed operating condition actually performed:
Operating pressure at tool inlet / units:
Observation window / variation:
Comparison with the applicable requirement:

ONE-CHANGE RETEST (repeat this block for each change)
Exact change and reason:
Same prescribed test condition / supply configuration exceptions:
Stopped and operating observations / locations / units:
Result; limitations on attributing a cause:

Tool troubleshooting needed / source / next check:
Separate final-fastener-torque procedure and verification record:
Unresolved questions / technician / date:

Do not exceed the tool's maximum pressure. Follow the complete safety instructions.
This record does not measure airflow, certify output torque or prove a failed component.