DTC guide

P2199 Intake Air Temperature (IAT) Sensor 1-2 Incorrect Correlation

P2199 can indicate a significant difference between the two intake air temperature readings after the engine starts.

Engine sensors2025 Honda Accord 1.5 turbo

Quick answer

P2199 can indicate a significant difference between the two intake air temperature readings after the engine starts.

Vehicle coverage: 2025 Honda Accord 1.5 turbo. Confirm the exact configuration and applicable safety procedure before testing or repair.

On this page
  1. What this code means
  2. What the vehicle may do
  3. Possible fault areas
  4. Diagnostic path
  5. What P2199 means
  6. Before troubleshooting
  7. Confirmation Procedure
  8. Scanner function
  9. Check the connections
  10. More diagnostic steps
  11. Final check
P2199 Intake Air Temperature (IAT) Sensor 1-2 Incorrect Correlation diagnostic guide

What this code means

P2199 can indicate a significant difference between the two intake air temperature readings after the engine starts.

The code describes disagreement between IAT sensor 1 and IAT sensor 2 after engine start; it does not by itself select between a connection problem and an IAT sensor 2 problem. That distinction comes from the connector inspection and its normal or abnormal result.

What the vehicle may do

  • The two intake air temperature readings may differ significantly.
  • The PCM may store this code after the engine starts.

Possible fault areas

  • Connections or terminals may have a problem.
  • IAT sensor 2 may have a problem.

Diagnostic path

What P2199 means

On this 2025 Honda Accord 1.5, P2199 means Intake Air Temperature (IAT) Sensor 1-2 Incorrect Correlation. In plain language, the two intake air temperature readings may not agree. After the engine starts, the PCM stores this code if the temperature difference is significant. Possible fault areas include the connections, terminals, and IAT sensor 2. Here is what this code tells us. The two intake air temperature readings may differ significantly. The PCM may store this code after the engine starts. Here are the main areas to check. Connections or terminals may have a problem. IAT sensor 2 may have a problem.

Before troubleshooting

Before you troubleshoot, review How to Troubleshoot.

Confirmation Procedure

Here is the separate Confirmation Procedure. Turn the vehicle to the OFF (LOCK) mode. Leave the vehicle for at least 6 hours. Then start the engine. Let it idle for at least 10 seconds.

Scanner function

For this check, the diagnostic scanner (HDS) function is PGM-FI > Data List.

Check the connections

The connector visual inspection is a separate check. Let us check the connectors at ECT sensor 1, ECT sensor 2, MAF sensor/IAT sensor 1, and IAT sensor 2. Make sure each connection is secure, and look for loose terminals at each component. The connections and terminals should be OK. If their condition is abnormal, there is a problem with the connections or terminals. If their condition is normal, there is a problem with IAT sensor 2.

The normal-result branch applies to the full connector check, not just the connector at IAT sensor 2. Secure connections and no loose terminals at ECT sensor 1, ECT sensor 2, MAF sensor/IAT sensor 1, and IAT sensor 2 lead to the IAT sensor 2 diagnosis. An abnormal connection or terminal condition instead leads to the connection-or-terminal diagnosis.

More diagnostic steps

For more diagnostic steps, visit stepdiagnostics.com.

Final check

The connector check can point to a connection or terminal problem, or to IAT sensor 2.

For more guided automotive diagnostics, visit STEP Diagnostics.