What this code means
U128D can indicate that either BSI radar unit has lost communication with the Gauge Control Module.
What the vehicle may do
- Either radar unit may lose signals from the Gauge Control Module.
- The Gauge Control Module may not start normally.
Possible fault areas
- Possible faults include the Gauge Control Module power and ground circuit.
- Possible faults include the BB-CAN_H and BB-CAN_L circuits.
- Possible faults include the Gauge Control Module.
Diagnostic path
What U128D means
Perform the following inspections based on the DTC stored in each unit. DTC Inspection Items Work Items Power Seat Control Unit: U0199 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Power Window Master Switch) Power Seat Control Unit: U0199 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Power Window Master Switch) Power Seat Control Unit: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Body Control Module) Power Seat Control Unit: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Body Control Module) Power Seat Control Unit: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Gauge Control Module) Power Seat Control Unit: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Seat Control Unit~Gauge Control Module) Front Seat Heater Control Unit: U1064 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Front Seat Heater Control Unit~Climate Control Unit) Front Seat Heater Control Unit: U1064 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Front Seat Heater Control Unit~Climate Control Unit) Climate Control Unit: U0199 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Power Window Master Switch) Climate Control Unit: U0199 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Power Window Master Switch) Climate Control Unit: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Body Control Module) Climate Control Unit: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Body Control Module) Climate Control Unit: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Gauge Control Module) Climate Control Unit: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Gauge Control Module) Climate Control Unit: U1290 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Front Seat Heater Control Unit) Climate Control Unit: U1290 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Climate Control Unit~Front Seat Heater Control Unit) Automatic Lighting Control Unit-Sensor: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Automatic Lighting Control Unit-Sensor~Body Control Module) Automatic Lighting Control Unit-Sensor: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Automatic Lighting Control Unit-Sensor~Body Control Module) Body Control Module: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Body Control Module~Gauge Control Module) Body Control Module: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Body Control Module~Gauge Control Module) Body Control Module: U1291 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Body Control Module~Relay Control Module) Body Control Module: U1291 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Body Control Module~Relay Control Module) Gauge Control Module: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Gauge Control Module~Body Control Module) Gauge Control Module: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Gauge Control Module~Body Control Module) Gauge Control Module: U128F External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Gauge Control Module~Left Side BSI Radar Unit/Right Side BSI Radar Unit) Gauge Control Module: U128F Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Gauge Control Module~Left Side BSI Radar Unit/Right Side BSI Radar Unit) DTC Inspection Items Work Items Keyless Access Backup Control Unit (Body Control Module): U128D Keyless Access Control Unit (Body Control BB-CAN_H, BB-CAN_L Open Wire Inspection (Keyless Access Backup Control Unit (Body Control Module)/Keyless Access External Circuit Module): U128D Control Unit (Body Control Module)/Keyless Access Power Control Unit (Body Control Module)~Gauge Control Module) Keyless Access Power Control Unit (Body Control Module): U128D Keyless Access Backup Control Unit (Body Control Module): U128D Keyless Access Control Unit (Body Control BB-CAN_H, BB-CAN_L Open Wire Inspection (Keyless Access Backup Control Unit (Body Control Module)/Keyless Access Control Unit Module): U128D Control Unit (Body Control Module)/Keyless Access Power Control Unit (Body Control Module)~Gauge Control Module) Keyless Access Power Control Unit (Body Control Module): U128D Left Front Lighting Control Unit: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Body Control Module) Left Front Lighting Control Unit: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Body Control Module) Left Front Lighting Control Unit: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Gauge Control Module) Left Front Lighting Control Unit: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Gauge Control Module) Left Front Lighting Control Unit: U1291 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Relay Control Module) Left Front Lighting Control Unit: U1291 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Headlight~Relay Control Module) Power Window Master Switch: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Body Control Module) Power Window Master Switch: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Body Control Module) Power Window Master Switch: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Gauge Control Module) Power Window Master Switch: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Gauge Control Module) Power Window Master Switch: U1299 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Climate Control Unit) Power Window Master Switch: U1299 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Power Window Master Switch~Climate Control Unit) Right Front Lighting Control Unit: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Body Control Module) Right Front Lighting Control Unit: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Body Control Module) Right Front Lighting Control Unit: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Gauge Control Module) Right Front Lighting Control Unit: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Gauge Control Module) Right Front Lighting Control Unit: U1291 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Relay Control Module) Right Front Lighting Control Unit: U1291 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Headlight~Relay Control Module) Relay Control Module: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Relay Control Module~Body Control Module) Relay Control Module: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Relay Control Module~Body Control Module) Relay Control Module: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Relay Control Module~Gauge Control Module) Relay Control Module: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Relay Control Module~Gauge Control Module) Left Side BSI Radar Unit: U1281 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit/Right Side BSI Radar Unit~Body Control Module) Right Side BSI Radar Unit: U1281 Left Side BSI Radar Unit: U1281 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit/Right Side BSI Radar Unit~Body Control Module) Right Side BSI Radar Unit: U1281 Left Side BSI Radar Unit: U128D External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit/Right Side BSI Radar Unit~Gauge Control Module) Right Side BSI Radar Unit: U128D Left Side BSI Radar Unit: U128D Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit/Right Side BSI Radar Unit~Gauge Control Module) Right Side BSI Radar Unit: U128D Left Side BSI Radar Unit: U1297 External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit~Right Side BSI Radar Unit) Left Side BSI Radar Unit: U1297 Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Left Side BSI Radar Unit~Right Side BSI Radar Unit) Right Side BSI Radar Unit: U128F External Circuit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Side BSI Radar Unit~Left Side BSI Radar Unit) Right Side BSI Radar Unit: U128F Control Unit BB-CAN_H, BB-CAN_L Open Wire Inspection (Right Side BSI Radar Unit~Left Side BSI Radar Unit) Telematics Control Unit: U1281-00 External Circuit BB-CAN_H/YB-CAN B_H, BB-CAN_L/YB-CAN B_L Open Wire Inspection (Telematics Control Unit~Body Control Module) Telematics Control Unit: U1281-00 Control Unit BB-CAN_H/YB-CAN B_H, BB-CAN_L/YB-CAN B_L Open Wire Inspection (Telematics Control Unit~Body Control Module) Telematics Control Unit: U128D-00 External Circuit BB-CAN_H/YB-CAN B_H, BB-CAN_L/YB-CAN B_L Open Wire Inspection (Telematics Control Unit~Gauge Control Module) Telematics Control Unit: U128D-00 Control Unit BB-CAN_H/YB-CAN B_H, BB-CAN_L/YB-CAN B_L Open Wire Inspection (Telematics Control Unit~Gauge Control Module)
On this 2025 Honda Accord 1.5, U128D means the Left Side BSI Radar Unit or Right Side BSI Radar Unit has lost communication with the Gauge Control Module. A radar unit stores this code when it cannot receive the module's signals over B-CAN. Possible fault areas include the module's power and ground circuit, the communication wiring, and the module itself. Here is what this code tells us. Either radar unit may lose signals from the Gauge Control Module. The Gauge Control Module may not start normally. Here are the main areas to check. Possible faults include the Gauge Control Module power and ground circuit. Possible faults include the BB-CAN_H and BB-CAN_L circuits. Possible faults include the Gauge Control Module.
Start with module power and ground
Before you troubleshoot, review How to Troubleshoot. This code may be stored because the Gauge Control Module does not start normally. A failure in its power or ground circuit can also store the code. Before this troubleshooting, check the Gauge Control Module power and ground circuit first. Then use B-CAN Lost Communication troubleshooting for this code.
The radar unit stores U128D because it cannot receive the Gauge Control Module's signals; that does not by itself identify the radar unit as faulty. The power and ground check comes first because a Gauge Control Module startup problem or power/ground circuit failure can also produce this code.
U128D confirmation routine
Here is the separate U128D Confirmation Procedure. That routine calls for turning the vehicle to ON mode. Then wait for at least 5 seconds.
Scanner function reference
The diagnostic scanner (HDS) lists this function reference: Driving Support > Blind Spot Information > Data List.
B-CAN preliminary checks
The B-CAN Lost Communication checks cover a B-CAN circuit connected to the CAN gateway. Before you troubleshoot, review How to Troubleshoot. If the failure happens intermittently or is difficult to reproduce, review How to Troubleshoot (Handling Intermittent and Low Reproducibility Failures). Check the transmitting control unit's power and ground circuit based on the stored DTC.
Address gateway codes first
Troubleshoot any DTCs listed or indicated systems below first. Network Communications \[CAN gateway\]: Go to the indicated DTC's troubleshooting
If Network Communications \[CAN gateway\] indicates a DTC, troubleshoot that indicated DTC first.
Choose the U128D wiring check
Choose the inspection based on the DTC stored in each unit. If U128D is stored in either radar unit, use the BB-CAN_H, BB-CAN_L open wire inspection between the radar units and the Gauge Control Module. This inspection covers both the external circuit and control unit checks.
The table uses both the code and the unit storing it to identify the circuit section. U128D appears under several units, each with its own connection to the Gauge Control Module. The radar-unit entries identify the radar-to-Gauge Control Module section for both External Circuit and Control Unit inspection items, rather than identifying two different wiring sections.
B-CAN confirmation routine
The B-CAN checks also define a separate Confirmation Procedure. That routine calls for turning the vehicle to ON mode. For details, check the U128D Confirmation Procedure explained earlier.
Open-wire inspection setup
The separate BB-CAN_H, BB-CAN_L open wire inspection checks the wiring between the radar units and the Gauge Control Module. Before you take these measurements, IG Mode must be OFF. The left side BSI radar unit/Right side BSI radar unit connector (6P) must be disconnected. Gauge control module connector A (32P) must also be disconnected. This inspection checks two terminal pairs.
Check BB-CAN_H
For the BB-CAN_H open wire inspection, IG Mode must be OFF. Both specified connectors must be disconnected. Place one probe on left side BSI radar unit/Right side BSI radar unit connector (6P) female terminal 3. Place the other probe on gauge control module connector A (32P) female terminal 20. The reading should be less than 1 ohm. A reading below that limit is normal for this circuit check.
Check BB-CAN_L and interpret the results
For the BB-CAN_L open wire inspection, IG Mode must be OFF. Both specified connectors must be disconnected. Place one probe on left side BSI radar unit/Right side BSI radar unit connector (6P) female terminal 5. Place the other probe on gauge control module connector A (32P) female terminal 21. The reading should be less than 1 ohm. A reading below that limit is normal for this circuit check. If the open-wire inspection is abnormal, there is a problem in the circuit. If the inspection is normal, there is a problem with the Gauge Control Module.
The normal branch depends on both BB-CAN_H and BB-CAN_L meeting their less-than-1-ohm conditions with IG Mode OFF and the specified connectors disconnected. One normal reading does not establish a normal inspection, and exactly 1 ohm does not meet the stated limit. This complete inspection is what separates the circuit-problem branch from the Gauge Control Module-problem branch.
Final check
U128D can involve Gauge Control Module power and ground, communication wiring, or the module itself.
For more guided automotive diagnostics, visit STEP Diagnostics.






