DTC guide

P2797 Electric Oil Pump Performance

P2797 can indicate electric oil pump motor speed staying too high during a TCM start command.

Engine diagnostics2025 Honda Accord 1.5 turbo

Quick answer

P2797 can indicate electric oil pump motor speed staying too high during a TCM start command.

Vehicle coverage: 2025 Honda Accord 1.5 turbo. Confirm the exact configuration and applicable safety procedure before testing or repair.

On this page
  1. What this code means
  2. What the vehicle may do
  3. Possible fault areas
  4. Diagnostic path
  5. What P2797 means
  6. Before troubleshooting
  7. Address the listed prerequisite first
  8. Electric oil pump
  9. Separate confirmation procedure
  10. Scanner function references
  11. More diagnostic steps
  12. Final check
P2797 Electric Oil Pump Performance diagnostic guide

What this code means

P2797 can indicate electric oil pump motor speed staying too high during a TCM start command.

What the vehicle may do

  • Electric oil pump speed can stay above the monitored limit.

Possible fault areas

  • The electric oil pump may need replacement.

Diagnostic path

What P2797 means

On this 2025 Honda Accord 1.5, code P2797 means Electric Oil Pump Performance. When the TCM sends a start command, it stores this code if the electric oil pump motor runs above a specified speed for a certain period. The electric oil pump may need attention. Here is what this code tells us. Electric oil pump speed can stay above the monitored limit. Here are the main areas to check. The electric oil pump may need replacement.

The fault condition combines three things: a TCM start command, motor speed above the specified speed, and that condition lasting for a certain period. The code therefore concerns sustained excessive speed during the start command, rather than simply whether the pump runs.

Before troubleshooting

Before you troubleshoot, review How to Troubleshoot.

Address the listed prerequisite first

Troubleshoot any DTCs listed or indicated systems below first. DC-DC Converter \[PGM-FI\]: DTC P0A94

The DC-DC Converter [PGM-FI] entry is a prerequisite: if P0A94 or the indicated system applies, its troubleshooting comes before the electric oil pump replacement step. It is not presented as an alternative result of an oil pump test.

First, troubleshoot any of the listed codes or indicated systems shown on screen.

Electric oil pump

Replacement is the listed work item for the Electric Oil Pump.

Separate confirmation procedure

The separate confirmation procedure is defined this way. Turn the vehicle to the ON mode. Use the diagnostic scanner (HDS) function \[Electrical Oil Pump Activation\]. Drive the electric oil pump for at least 5 seconds.

The minimum 5-second duration belongs to pump operation during the HDS [Electrical Oil Pump Activation] confirmation procedure with the vehicle in ON mode. It is distinct from the period used by the TCM to judge excessive motor speed; the two timing conditions should not be treated as interchangeable.

Scanner function references

The listed scanner function paths are AT > Function Test > Electrical Oil Pump Activation and AT > Data List.

More diagnostic steps

For more diagnostic steps, visit stepdiagnostics.com.

Final check

P2797 can point to excessive electric oil pump motor speed when the TCM sends a start command.

For more guided automotive diagnostics, visit STEP Diagnostics.